Solution
- With the S4 MK3 connected to your computer, open TRAKTOR’s Preferences.
- Navigate to the Traktor S4 MK3 entry at the bottom of the menu.
- If you want to recalibrate the 4 FX1 and 4 FX2 knobs, click the Recalibrate button corresponding to Upper FX Units.
- Follow the onscreen prompts to complete the recalibration.
How do I connect my turntable to Traktor S4?
To connect the turntable to the mixer, plug in the RCA cables on the turntable to the Phono Inputs on the mixer or controller. Attach the ground wire of your turntable to the ground post on the back of the mixer. Set the Phono/Line switch of the same mixer channel to Phono.
How do I turn off crossfader?
Q9 Can I disable the crossfader? Yes. Open rekordbox dj mixer panel and turn off all Cross Fader Assign buttons (1, 2, 3 and 4) to disable the crossfader.
How do you calibrate Traktor?
Recalibrating TRAKTOR KONTROL devices (except MK3 models)
- Open the TRAKTOR Preferences > Traktor Kontrol *controller model*
- Under Calibration, click on the Recalibrate button next to the control you wish to calibrate.
How do I clean my DJ controller?
Use a microfibre cloth to gently wipe the spaces in between the knobs, faders, jogwheels, earcups, and other moving parts. You’ll also want to use a microfibre cloth to clean your DJ controller or media player’s screens.
Can you use Traktor S4 as a mixer?
Can I use the TRAKTOR KONTROL S4 as a standalone mixer? The S4 can be used in the alternative standalone mixer mode without a computer. This means you can mix external audio such as turntables on the S4.
How do I turn off the crossfader on my DDJ 800?
You can adjust crossfader curve and cut lag in rekordbox [Preferences]> [Controller]> [Mixer]. For details, refer to the Operating Instructions > “Changing the settings” > “Changing the settings with rekordbox”.
Why is the crossfader on my Traktor not working?
If the crossfader section is visible, but its slider is not shown, you are running TRAKTOR in External Mixing Mode. In External Mixing Mode the Decks are assigned to separate outputs of your audio interface for mixing with an external DJ mixer. In this case, use the crossfader of your external DJ mixer.
Why is my Traktor Kontrol S4 Mk2 not recognized by the iOS device?
If you are experiencing problems with your TRAKTOR KONTROL S4 MK2 in TRAKTOR DJ 1, or if your TRAKTOR KONTROL S4 MK2 is not being recognized by the iOS device, please verify the following: Install the latest firmware update for your TRAKTOR KONTROL S4 MK2 as explained in this article.
How do I use the built-in mixer of Traktor with my controller?
If you want to use the built-in mixer of TRAKTOR, for example with controllers like the TRAKTOR KONTROL S2 / S4 / Z1 / Z2 or any TRAKTOR READY controller with a mixer control section, set the Mixing Mode to Internal. If you can move the crossfader, but it does not crossfade between your Decks as desired, check your crossfader assignment.
