INTERCOAT ABRASION: It is not necessary to abrade between Bona waterborne sealer and finish coats unless more than 48 hours has passed since the previous coat was applied.
How many coats of Bona Traffic HD are recommended?
2 coats
How many coats of Bona Traffic HD should you use? Like Mega One, Bona always recommends a minimum of 2 coats of finish. Adding a third coat gives an extra layer of protection that may be right for some homeowners who are worried about scratches.
How do you use Bona ClassicSeal?
THE BONA ClassicSeal™ SYSTEM: Apply 1 coat of Bona ClassicSeal and 2 coats of a Bona w aterborne finish. Bona ClassicSeal is not recommended for use over Bona DriFast® Stain. Bona ClassicSeal minimizes sidebonding and grain raise, provides a build layer and prevents the finish from penetrating into the wood surface.
How do you mix Bona Traffic HD with hardener?
Bona Traffic HD® Hardener
- Shake Bona Traffic HD finish (Part A) well for 30 seconds.
- Add Bona Traffic HD Hardener (Part B) to finish (Part A). One 10.38 oz. bottle of hardener will activate one gallon of finish.
- Immediately shake mixture vigorously for 30-45 seconds.
- Insert supplied filter into bottle.
Can you apply Bona Mega with a brush?
Pour a small amount of sealer to the flooring, BONA is self leveling so you can be assured of even distribution of coating. Use brush for perimeter or corner area. Avoid termination at the middle of the flooring so there will be no visible and obvious cut marks when coating dries.
Can you use bona traffic without hardener?
Absolutely! Bona Traffic does not become a urethane without the hardener. The finish will still dry but the film will be soft and will never reach its maximum durability.
How long does Bona stain take to dry?
Allow stain to dry thoroughly (minimum 2 hours for wood tones, 6 hours minimum for white and 12-18 hours for Ebony, Spice Brown, Bark and Cocoa under ideal conditions of 60º-80º F(16º-27ºC) with 35-75% relative humidity.
Can you use Bona Traffic without hardener?
How many gallons of Bona Traffic HD do I need?
Performance: Bona Traffic is very tough and resistant to scratches and general wear. The formula is clear when dry and resistant to yellowing. Coverage: Expect 350-400 square feet of coverage per gallon. When determining how much you’ll need, keep in mind that Bona recommends two coats of Traffic.
How long does Bona floor finish take to dry?
CURING: The curing process takes approximately 7 days, (75% cured after 1 day, 90% after 3 days). The floor may be w alked on after 24 hours, but remains susceptible to scuffing or marring until completely cured. Furniture can be moved back in carefully after 3 days.
Does Bona Traffic HD come with hardener?
does the bona hd traffic, semi gloss come with the hardener? Answer: Yes. you can mix an entire gallon, or a partial amount, but it has to be used within the time limit.
